With budget remodeling projects on the rise, more and more homeowners are seeing the potentials of Ready to Assemble Kitchen Cabinets as one of their tickets to a more attractive interior as well as a more functional kitchen. But like other home improvements, it is essential to equip yourself with enough knowledge of any product or supply before letting go of your hard-earned cash. Before you start shopping for new cabinetry to integrate into your New York home, taking the time to know more about RTA cabinet units would surely pay off whether you are in Long Island, Manhattan, Brooklyn, Staten Island or Queens.
Ready to Assemble Kitchen Cabinets, as the name suggests, are cabinet units that are bought packaged with everything needed from the cut-to-fit pieces that makes up the shelves, frames, doors and drawers ; and all the functional and decorative hardware. Due to the increase in demand, RTA cabinets come in the most popular range of sizes, designs and finishes. The cost is also as varied as that with pre-assembled ones ranging from the low-end spectrum of particleboard to high-end and luxurious hardwood. The factors that will considerably affect how much you pay for specific sets are the complexity in design, materials, craftsmanship, and finish.
Other than coming in the trendiest fashions, there are still a lot of advantageous to opting for Ready to Assemble Kitchen Cabinets:
As you do the assembling yourself, you can cutback on labor costs.
Packed flat, transportation is easier and shipping rates are even less compared with fully assembled cabinet units as they take up lesser space.
Parts are already cut-to-fit and holes are already drilled where they should be. So even those without any handy skills can follow assembly instructions easily. Tools are not even a problem as often the only one you'll need is a screwdriver. Most set of RTA cabinetry need nothing more than screws, glue, and wood dowels, all of which are already supplied within the package that comes together with a comprehensive instruction manual.
RTA cabinet units cost just a fraction of the price of custom made cabinets but can be just as beautiful and durable as any pieces you can see on showrooms.
Remodeling project can be finished much faster. As Ready to Assemble Kitchen Cabinets are easier to store, your local home improvement shop or online store would surely have what you need on hand. But even if the RTA cabinet units you choose are out of stock, it would only take 2 to 3 weeks for them to get delivered compared with custom-made which takes around 8 weeks.
When browsing through the selection of available options, take the current style of your home in mind. This makes the task less overwhelming as you narrow down your choices as well as ensures a well-complementing style for the existing décor. Before ordering Ready to Assemble Kitchen Cabinets, a crucial thing to ensure is accurate measurements of the available space to get cabinetry that fits perfectly. To maximize organization, features such as light rails, roll-out trays, drawer organizers and Lazy Susans can be added.
Sunday, February 28, 2010
Saturday, February 27, 2010
Learn How to Design the Best Built in Cabinet For Your Home
A lot of people want to know how to build a built in cabinet to use for an entertainment center and book cases. When you build a built in cabinet you want the cabinets to look well designed and fitted.
When learning how to build a built in cabinet, the first thing you should focus on is the measurement of the wall area where the built in cabinet will be installed. At a scale of 1/4 inch equals one foot, you should draw on a graph paper the dimensions of the wall.
You should also keep in mind the location of any doors, vents, windows or door ways. You want the cabinet to be designed to accommodate your furniture, so you will need to sketch the entire room's dimension so you can properly pre-plan the furniture placement.
You should then use a second piece of graph paper to sketch an elevation of the wall and cabinet. The elevation is a front view of he cabinet. You will need to take down measurements of the length and height of the wall.
You should also take a note of any utility work that may need to be done, and especially any wiring for lighting for the cabinet. After you take your measurements you will need to determine what you're going to use your cabinet for. For example, some people want to learn how to build a built in cabinet for a book case, to keep a television, a bar, or numerous other reasons.
When you design your cabinet you should make sure it has a focal point. Usually the design will look better if it is symmetrical. So you should locate the center location of the cabinet on the graph paper and draw a thin pencil line.
Center the biggest object on this line and draw cabinets below the big object so that they have covered doors for hidden storage. After deciding on the shelves you will use for your cabinet, you should finish the drawing with molding, rise boards, and the trims to give the cabinet more appearance to fit the room.
When learning how to build a built in cabinet, the first thing you should focus on is the measurement of the wall area where the built in cabinet will be installed. At a scale of 1/4 inch equals one foot, you should draw on a graph paper the dimensions of the wall.
You should also keep in mind the location of any doors, vents, windows or door ways. You want the cabinet to be designed to accommodate your furniture, so you will need to sketch the entire room's dimension so you can properly pre-plan the furniture placement.
You should then use a second piece of graph paper to sketch an elevation of the wall and cabinet. The elevation is a front view of he cabinet. You will need to take down measurements of the length and height of the wall.
You should also take a note of any utility work that may need to be done, and especially any wiring for lighting for the cabinet. After you take your measurements you will need to determine what you're going to use your cabinet for. For example, some people want to learn how to build a built in cabinet for a book case, to keep a television, a bar, or numerous other reasons.
When you design your cabinet you should make sure it has a focal point. Usually the design will look better if it is symmetrical. So you should locate the center location of the cabinet on the graph paper and draw a thin pencil line.
Center the biggest object on this line and draw cabinets below the big object so that they have covered doors for hidden storage. After deciding on the shelves you will use for your cabinet, you should finish the drawing with molding, rise boards, and the trims to give the cabinet more appearance to fit the room.
Monday, February 22, 2010
Elegant Dining Room Furniture
Though often underappreciated, your dining room and the way that it is decorated can have a major impact on how your house as a whole is viewed by guests. Many people feel that there is not much that can be done to decorate your dining room without spending a small fortune, causing them to settle for boring furniture and using wall decorations in an attempt to create somewhat of an ambiance. However, if you take the time to look around for some good deals, you may find that you can get the elegant furniture that you desire to transform your dining room from a room that seems bland to one that instantly catches the eyes of all of your guests.
When looking for deals on elegant dining room furniture, the first thing that you should do is decide what sort of furniture you want for your dining room in the first place. If you decide that you want something with a classic wood look, for instance, then you can save time in your search by not looking at cosmopolitan leather barstools or upholstered dining chairs. Likewise, if you decide that you want to use modern-looking barstools as the main form of seating in your dining room, then you can save the time that you might spend pricing high-backed leather side chairs and wood-and-rush wave chairs. With a number of different styles and colors available in dining room furniture, there is no reason that you should not be able to get just the look in your dining room that you want.
After you determine the kind of look and décor you want to achieve in your dining room, take a little bit of time to review your budget so that you will know exactly how much you can afford to spend. Remember that you will not necessarily have to spend a large amount of money in order to buy the elegant dining room furniture that you want. Therefore, even if it seems like you do not have a very large budget to work with, that does not mean that you will not be able to get the furniture that you want. Use your budget to determine both the maximum amount that you can spend on dining room furniture as well as the amount that you would prefer to spend if you can find a deal on the pieces that you purchase.
Once you have a pretty good idea of what sort of dining room furniture that you want to buy as well as the amount that you would like to spend on it, begin perusing different stores in order to see what sort of elegant dining room furniture pieces they have available. Should you notice any specific designs of dining room tables, dining chairs, or barstools that particularly catch your attention, make note of their name as well as where you found them. You may be able to find your favorite Tiffany bi-cast leather chairs or the 9-piece counter-height dining room collection that you loved at another store for a significant discount. Taking the time to shop around in a few places as well as online will enable you to find the best deal on all of your dining room decorations.
While shopping around for your new dining room furniture, do not forget to take advantage of the benefits offered by the internet. Not only will you be able to get online and research different dining room furniture designs and the prices charged by various retailers for similar dining room sets, but you may even find some or all of the elegant dining room furniture that you want from retailers who operate online as well. Many shoppers do not even consider shopping for dining room furniture online because they worry about having to pay excessive shipping charges on anything that they might order. Luckily, a vast number of retailers offer either free of flat-rate shipping on many furniture items, letting you save money on ordered dining room furniture by having it shipped right to your door at a lower price while paying little or nothing for the shipping charges. Stores that offer both online and physical shopping outlets may also offer free shipping to a local store, allowing you to pick up your order at your own convenience.
If your dining room furniture needs to be assembled, make sure that you follow all directions so that it will look as elegant as the show model that made you want to buy the dining room furniture in the first place. Once you have your furniture assembled, all that you have left to do is to arrange it as best fits your dining room and finish your decorating to further bring out the beauty of your new dining room furniture.
When looking for deals on elegant dining room furniture, the first thing that you should do is decide what sort of furniture you want for your dining room in the first place. If you decide that you want something with a classic wood look, for instance, then you can save time in your search by not looking at cosmopolitan leather barstools or upholstered dining chairs. Likewise, if you decide that you want to use modern-looking barstools as the main form of seating in your dining room, then you can save the time that you might spend pricing high-backed leather side chairs and wood-and-rush wave chairs. With a number of different styles and colors available in dining room furniture, there is no reason that you should not be able to get just the look in your dining room that you want.
After you determine the kind of look and décor you want to achieve in your dining room, take a little bit of time to review your budget so that you will know exactly how much you can afford to spend. Remember that you will not necessarily have to spend a large amount of money in order to buy the elegant dining room furniture that you want. Therefore, even if it seems like you do not have a very large budget to work with, that does not mean that you will not be able to get the furniture that you want. Use your budget to determine both the maximum amount that you can spend on dining room furniture as well as the amount that you would prefer to spend if you can find a deal on the pieces that you purchase.
Once you have a pretty good idea of what sort of dining room furniture that you want to buy as well as the amount that you would like to spend on it, begin perusing different stores in order to see what sort of elegant dining room furniture pieces they have available. Should you notice any specific designs of dining room tables, dining chairs, or barstools that particularly catch your attention, make note of their name as well as where you found them. You may be able to find your favorite Tiffany bi-cast leather chairs or the 9-piece counter-height dining room collection that you loved at another store for a significant discount. Taking the time to shop around in a few places as well as online will enable you to find the best deal on all of your dining room decorations.
While shopping around for your new dining room furniture, do not forget to take advantage of the benefits offered by the internet. Not only will you be able to get online and research different dining room furniture designs and the prices charged by various retailers for similar dining room sets, but you may even find some or all of the elegant dining room furniture that you want from retailers who operate online as well. Many shoppers do not even consider shopping for dining room furniture online because they worry about having to pay excessive shipping charges on anything that they might order. Luckily, a vast number of retailers offer either free of flat-rate shipping on many furniture items, letting you save money on ordered dining room furniture by having it shipped right to your door at a lower price while paying little or nothing for the shipping charges. Stores that offer both online and physical shopping outlets may also offer free shipping to a local store, allowing you to pick up your order at your own convenience.
If your dining room furniture needs to be assembled, make sure that you follow all directions so that it will look as elegant as the show model that made you want to buy the dining room furniture in the first place. Once you have your furniture assembled, all that you have left to do is to arrange it as best fits your dining room and finish your decorating to further bring out the beauty of your new dining room furniture.
Saturday, February 20, 2010
Sliding Door: Repair or Replace?
Sometimes homeowners mistakenly assume that sliding door difficulties mean the doors have to be replaced, when really all that's needed is sliding door repair. A company that knows doors can improve the functionality and usability of sliding glass doors in a simple service call. Doors might need something as simple as new rollers or replacement track.
There are a number of causes for sliding door difficulties that routinely occur with age and regular use. If you have a family, you know how many times your sliding glass doors can be opened and closed in a day. Environmental factors such as moisture and dirt can also interfere with the doors' movement. The areas that generally need repair are the roller and the track. The roller can become worn down due to age, rust or excess moisture. Dirt, debris and pet hair can all build-up on the rollers or track, and the track can wear down over time. Another problem that can develop is locks that stick.
Sliding Door Repair Solutions
Companies like Arizona-based DCS Industries are sliding door repair experts. They can easily diagnose the problem and provide the solution to sliding door jams. These experts recommend that worn down rollers be replaced with a heavy-duty double roller. The tandem roller makes your sliding door glide open more easily and safely. If your sliding door has a single roller, in most cases it can be modified to use the industrial tandem roller. Most homeowners are relieved to find out they don't need to replace the door… just the rollers! There are times when track replacement is recommended to fix problems with sliding doors.
Sliding Door Maintenance
Once your doors are repaired and running smoothly on the tracks, you'll want to keep them functioning properly. It's important to clean the track on a regular basis. You can vacuum the track or even clean it with a gentle cleaning product or water and a toothbrush to remove debris. If you start to experience problems with your door, don't wait until the door is impossible to move before handling the sliding door repair. Keep your family safe and your home in great condition with beautiful, properly functioning doors.
There are a number of causes for sliding door difficulties that routinely occur with age and regular use. If you have a family, you know how many times your sliding glass doors can be opened and closed in a day. Environmental factors such as moisture and dirt can also interfere with the doors' movement. The areas that generally need repair are the roller and the track. The roller can become worn down due to age, rust or excess moisture. Dirt, debris and pet hair can all build-up on the rollers or track, and the track can wear down over time. Another problem that can develop is locks that stick.
Sliding Door Repair Solutions
Companies like Arizona-based DCS Industries are sliding door repair experts. They can easily diagnose the problem and provide the solution to sliding door jams. These experts recommend that worn down rollers be replaced with a heavy-duty double roller. The tandem roller makes your sliding door glide open more easily and safely. If your sliding door has a single roller, in most cases it can be modified to use the industrial tandem roller. Most homeowners are relieved to find out they don't need to replace the door… just the rollers! There are times when track replacement is recommended to fix problems with sliding doors.
Sliding Door Maintenance
Once your doors are repaired and running smoothly on the tracks, you'll want to keep them functioning properly. It's important to clean the track on a regular basis. You can vacuum the track or even clean it with a gentle cleaning product or water and a toothbrush to remove debris. If you start to experience problems with your door, don't wait until the door is impossible to move before handling the sliding door repair. Keep your family safe and your home in great condition with beautiful, properly functioning doors.
Thursday, February 18, 2010
How to Install a Wall Cabinet

2. Align the top edge of a temporary 1-by-3 support rail with the line for the bottom edge of the cabinets and drive three or four 2-inch screws through it into the wall studs.
3. Drill pilot holes through the sturdy part of the cabinet back or its support rail into wall studs. Screw the cabinet to the wall using two screws that are long enough to penetrate the studs by at least 1 1/2 inches.
Wednesday, February 17, 2010
A CASE OF CABINETS
It all started out as a great morning. The
day looked promising. I’d just taken a
sip of my morning coffee, when my
secret-agent communication device
sounded an SOS. Answering the device,
which is cleverly designed to look like a
cell phone, I learned that a friend’s
antique Celeron processor had just died.
He was inviting me to the funeral, which
involved a little newspaper wrapping and
a quick burial in the local dustbin, and
then a desperate trip to find a better
replacement. He had decided on an Intel
motherboard and a Pentium 4 CPU, but
had no clue about what cabinet to buy.
Not one to miss out on a tech-shopping
spree, I met him at the now infamous
Lamington Road, in south Mumbai.
A quick scan of my super-secret black
book told me that I was close to a dealer
I had bought from earlier. He didn’t
remember me though, but was polite
enough to lie, “Kaise hain aap? Haven’t
seen you for a long time”. My friend
quickly detailed his requirements—something
large and airy that would hold all of
his 7,65,23,476 peripherals. Off went the
vendor, and disappeared into a secret
crevice that only he knew existed—the
shop could hold three, four if you wanted
to be better acquainted with someone.
He returned, carrying a rather ordinary
looking beige and blue Frontech minitower
cabinet. Priced at Rs 1,250, it had a
300W power supply, which he claimed
was “Full 300W. Substandard nahi hai!”,
and also came with a 1 year warranty. It
had vents for fans, but we weren’t convinced.
After another quick disappearing
act, he came back with an Intex cabinet
that cost Rs 1,300. It had adequate drive
bays, a 300W SMPS and a year’s warranty.
Though it had everything that you’d need
such as air vents and fans, many colours
to choose from and a spacious
interior, we
weren’t convinced
just yet. We bid him
farewell and moved
on to find a little
more variety.
The next shop we
walked into had a better
feel to it. It was spacious,
had a look of professionalism
and had a well dressed vendor
behind the counter. As soon
as we mentioned cabinets, he
asked what CPU and motherboard
combination we had. “If you are
buying a Pentium 4 it’s fine, but
if you have an Athlon, you
have to be very careful,” he
warned us. “Athlons heat up a
lot more than Pentiums. If you
have other high-end equipment
such as a GeForce graphics
card, it’s going to be hot in
there and you’ll need additional
fans”. He showed us a Mercury
Oscar cabinet for Rs 1,400. It came
with a one year warranty, many cooling
vents at the back and a 300W SMPS. When
we asked to see something better, he
showed us an iBox and an unheard of VIP
brand of cabinets that cost Rs 1,500 each.
The VIP looked really good, and he said it
was a local brand, but had a rock-steady
power supply—good for over-clocking.
The VIP had easy-to-remove sliding panels
and air vents by the dozen. It had everything
we needed, but the unheard
of branding sent us shop-hopping
down the road.
The next store
looked swanky as well,
but the dealer started
pulling out all these
unheard of brands with
ugly tacky-looking cabinets.
They had lights galore,
and looked like they were
designed by the same person
who decorates the insides of
some of taxis. He could see
the look of disdain on our
faces, and asked, “Would
you prefer to see the top of
the line models?”
What he pulled out then
made us almost squeal with
delight. There are cabinets,
good cabinets and then there
are Antec cabinets. He pulled
out a jaw-dropping model
with thumb screws, removable
3.5-inch bays and screwless locking
for 5.25-inch devices—you can install
just about anything without ever using a
screwdriver. It had vents galore, a 350W
SMPS and a blowhole. Now here’s a real
solution to ventilation. Instead of normal
vents, blowholes on the top of the cabinet
blow air out from just above the CPU fan.
However, it cost Rs 6,500 and he wouldn’t
accept my undying gratitude—cash
and credit cards only please.
An hour later, when I finally ran out of
arguments and conceded that my friend
could not sell his mother’s jewellery, we
decided that something a lot cheaper was
best. We were left with two options: either
a Mercury or VIP cabinet. Though I was
more impressed with the features of VIP,
my friend preferred to spend his money of
a better known brand. The Mercury it
was. I went back home dreaming of owning
the best Antec there is.
SHOPPING TIPS
¦ Insist on cases with adequate
ventilation, with fixtures to help
you mount fans. Look for rear and
front vents.
¦ Get extra fans mounted on the case,
even if you don't intend to over-clock. It will
provide better airflow and make your hardware
run smoother and last longer.
¦ 300W power supplies are standard and
adequate for today's computers. Look for
steady power supplies, as fluctuations in
the power will cause lockups and damage
hardware.
¦ Choose a large cabinet: either a big
mini-tower, or tower cabinet. Make sure
that it will hold your motherboard—
MicroATX or ATX form factor. This
aids ventilation and allows easy access
to hardware.
¦ Screw mounted blanking plates in the
rear (that cover unused bays) are better
than those that have to be broken. You
can reattach these later when a bay is
unused, preventing unnecessary exposure
to dust.
¦ Look for cases with thumb-screws or
slide out access panels that let you open
your cabinet easily.
day looked promising. I’d just taken a
sip of my morning coffee, when my
secret-agent communication device
sounded an SOS. Answering the device,
which is cleverly designed to look like a
cell phone, I learned that a friend’s
antique Celeron processor had just died.
He was inviting me to the funeral, which
involved a little newspaper wrapping and
a quick burial in the local dustbin, and
then a desperate trip to find a better
replacement. He had decided on an Intel
motherboard and a Pentium 4 CPU, but
had no clue about what cabinet to buy.
Not one to miss out on a tech-shopping
spree, I met him at the now infamous
Lamington Road, in south Mumbai.
A quick scan of my super-secret black
book told me that I was close to a dealer
I had bought from earlier. He didn’t
remember me though, but was polite
enough to lie, “Kaise hain aap? Haven’t
seen you for a long time”. My friend
quickly detailed his requirements—something
large and airy that would hold all of
his 7,65,23,476 peripherals. Off went the
vendor, and disappeared into a secret
crevice that only he knew existed—the
shop could hold three, four if you wanted
to be better acquainted with someone.
He returned, carrying a rather ordinary
looking beige and blue Frontech minitower
cabinet. Priced at Rs 1,250, it had a
300W power supply, which he claimed
was “Full 300W. Substandard nahi hai!”,
and also came with a 1 year warranty. It
had vents for fans, but we weren’t convinced.
After another quick disappearing
act, he came back with an Intex cabinet
that cost Rs 1,300. It had adequate drive
bays, a 300W SMPS and a year’s warranty.
Though it had everything that you’d need
such as air vents and fans, many colours
to choose from and a spacious
interior, we
weren’t convinced
just yet. We bid him
farewell and moved
on to find a little
more variety.
The next shop we
walked into had a better
feel to it. It was spacious,
had a look of professionalism
and had a well dressed vendor
behind the counter. As soon
as we mentioned cabinets, he
asked what CPU and motherboard
combination we had. “If you are
buying a Pentium 4 it’s fine, but
if you have an Athlon, you
have to be very careful,” he
warned us. “Athlons heat up a
lot more than Pentiums. If you
have other high-end equipment
such as a GeForce graphics
card, it’s going to be hot in
there and you’ll need additional
fans”. He showed us a Mercury
Oscar cabinet for Rs 1,400. It came
with a one year warranty, many cooling
vents at the back and a 300W SMPS. When
we asked to see something better, he
showed us an iBox and an unheard of VIP
brand of cabinets that cost Rs 1,500 each.
The VIP looked really good, and he said it
was a local brand, but had a rock-steady
power supply—good for over-clocking.
The VIP had easy-to-remove sliding panels
and air vents by the dozen. It had everything
we needed, but the unheard
of branding sent us shop-hopping
down the road.
The next store
looked swanky as well,
but the dealer started
pulling out all these
unheard of brands with
ugly tacky-looking cabinets.
They had lights galore,
and looked like they were
designed by the same person
who decorates the insides of
some of taxis. He could see
the look of disdain on our
faces, and asked, “Would
you prefer to see the top of
the line models?”
What he pulled out then
made us almost squeal with
delight. There are cabinets,
good cabinets and then there
are Antec cabinets. He pulled
out a jaw-dropping model
with thumb screws, removable
3.5-inch bays and screwless locking
for 5.25-inch devices—you can install
just about anything without ever using a
screwdriver. It had vents galore, a 350W
SMPS and a blowhole. Now here’s a real
solution to ventilation. Instead of normal
vents, blowholes on the top of the cabinet
blow air out from just above the CPU fan.
However, it cost Rs 6,500 and he wouldn’t
accept my undying gratitude—cash
and credit cards only please.
An hour later, when I finally ran out of
arguments and conceded that my friend
could not sell his mother’s jewellery, we
decided that something a lot cheaper was
best. We were left with two options: either
a Mercury or VIP cabinet. Though I was
more impressed with the features of VIP,
my friend preferred to spend his money of
a better known brand. The Mercury it
was. I went back home dreaming of owning
the best Antec there is.
SHOPPING TIPS
¦ Insist on cases with adequate
ventilation, with fixtures to help
you mount fans. Look for rear and
front vents.
¦ Get extra fans mounted on the case,
even if you don't intend to over-clock. It will
provide better airflow and make your hardware
run smoother and last longer.
¦ 300W power supplies are standard and
adequate for today's computers. Look for
steady power supplies, as fluctuations in
the power will cause lockups and damage
hardware.
¦ Choose a large cabinet: either a big
mini-tower, or tower cabinet. Make sure
that it will hold your motherboard—
MicroATX or ATX form factor. This
aids ventilation and allows easy access
to hardware.
¦ Screw mounted blanking plates in the
rear (that cover unused bays) are better
than those that have to be broken. You
can reattach these later when a bay is
unused, preventing unnecessary exposure
to dust.
¦ Look for cases with thumb-screws or
slide out access panels that let you open
your cabinet easily.
Sunday, February 14, 2010
Basics of Cabinet Refacing
When your kitchen starts looking outdated and worn, you know it's time for an upgrade. But you don't have to completely overhaul your entire kitchen to give it a brand new look. Often, you can accomplish a radical make over simply by updating the look of your kitchen cabinets. Cabinet refacing is just one of the ways to give your kitchen a dramatic facelift that will make it feel brand new. Here is a brief rundown on the basics of cabinet refacing.
The Basics: What is Cabinet Refacing?
Cabinet refacing involves putting a new finish on or replacing the visible or surface parts of your kitchen cabinets. In other words, cabinet refacing is a way of upgrading your kitchen cabinets without having to tear down the cabinet box cases that are attached to or embedded into the actual kitchen walls. It can be something as simple as adding a new veneer to the existing cabinet doors, or it can involve replacing old doors, drawer fronts, and cabinet hardware pieces with new ones.
Preparing the Existing Frame for New Fronts
In order to prepare the existing cabinet box frame, you have to remove all the existing doors and drawer fronts. Refinish the existing frame if you need to so that the new set of doors and drawers you've chosen match it. If you are replacing the hinges, fill in the holes made by the old ones, as the new hinges will probably not line up with the old ones. Filling in the holes keeps the cabinet box case structurally strong.
If Refinishing Existing Fronts
If you're keeping certain parts, and simply refinishing them, make sure you strip them completely of their paint and old finishes. Start with a rougher grade sand paper and continue stepping down the grade until you've run through to the very fine sandpaper types. You should do this when you're refinishing the cabinet box frame as well, to ensure a smooth clean finish. When you are adding stain and clear coating, make sure to sand over each layer with fine sandpaper to clear it of bumps before adding the next layer.
Picking a New Design
The above was a very brief description of the the mechanics of cabinet refacing, which is essentially a simple replacement of your old cabinet fronts with new ones. The fun part of the process is picking out the new cabinets that will be going into the old cabinet box frame. Depending on the kinds of doors and drawers you get, you might have to make adjustments to the box frame. It's recommended that you consult with an interior design company that specializes in cabinetry so that you can make an informed choice and make sure that the final result fits your vision. Bardon Cabinetry has been providing excellent custom cabinet refacing in San Diego for decades. Give them a call to find out more about what's involved.
The Basics: What is Cabinet Refacing?
Cabinet refacing involves putting a new finish on or replacing the visible or surface parts of your kitchen cabinets. In other words, cabinet refacing is a way of upgrading your kitchen cabinets without having to tear down the cabinet box cases that are attached to or embedded into the actual kitchen walls. It can be something as simple as adding a new veneer to the existing cabinet doors, or it can involve replacing old doors, drawer fronts, and cabinet hardware pieces with new ones.
Preparing the Existing Frame for New Fronts
In order to prepare the existing cabinet box frame, you have to remove all the existing doors and drawer fronts. Refinish the existing frame if you need to so that the new set of doors and drawers you've chosen match it. If you are replacing the hinges, fill in the holes made by the old ones, as the new hinges will probably not line up with the old ones. Filling in the holes keeps the cabinet box case structurally strong.
If Refinishing Existing Fronts
If you're keeping certain parts, and simply refinishing them, make sure you strip them completely of their paint and old finishes. Start with a rougher grade sand paper and continue stepping down the grade until you've run through to the very fine sandpaper types. You should do this when you're refinishing the cabinet box frame as well, to ensure a smooth clean finish. When you are adding stain and clear coating, make sure to sand over each layer with fine sandpaper to clear it of bumps before adding the next layer.
Picking a New Design
The above was a very brief description of the the mechanics of cabinet refacing, which is essentially a simple replacement of your old cabinet fronts with new ones. The fun part of the process is picking out the new cabinets that will be going into the old cabinet box frame. Depending on the kinds of doors and drawers you get, you might have to make adjustments to the box frame. It's recommended that you consult with an interior design company that specializes in cabinetry so that you can make an informed choice and make sure that the final result fits your vision. Bardon Cabinetry has been providing excellent custom cabinet refacing in San Diego for decades. Give them a call to find out more about what's involved.
Friday, February 12, 2010
Top Tips When Buying An Online Woodwork Course
If you are thinking about buying a woodwork course online the first thing you want to do is to surf the internet to find out what is available.
If you are new to the woodworking industry and are a little apprehensive about getting started, first think about all the benefits you'll receive by following through in your decision. For starters, you could change a few things around the house; build a garden bench, a bedside table, a toy box for your child, or whatever else you can come up with. Also, why not use your woodworking skills to make a little extra money!
Perhaps the number one question that you're thinking right now is what characteristics you should be looking for. So do take your time when looking into the different options available to make sure you find the course that is right for you.
I believe that the most important thing in a good woodwork course is that it includes detailed and easy to understand instructions. When you start making a chair, table, or wooden stairs, you'll want to have a step-by-step guide on how to do it. It's always good to see some pictures, especially if you are a visual person like me, but let's not forget that those pictures need to be accompanied by clear instructions. Even though the saying is that a picture is worth a thousand words, it's often different when actually constructing something, therefore, in-depth step-by-step instructions are characteristics of a good woodworking course.
You'll also need to have each part labelled on the pictures so that you understand correctly how to put together the materials you're working with. Look for clearly marked diagrams and even colored pictures to help out with clarification in your woodwork projects. The detailed wording and explanation combined with the pictures and labels will not only help you when creating a piece of furniture or wood object, but they can also be used as a guide for other objects that you create down the line.
And of course you want to have a huge variety of woodwork projects to choose from. You'll probably want to try your hand at some of the common woodworking projects like chairs, tables, and birdhouses. However, you should also have the chance to try other wood objects, such as windmills, wooden shelving units, toys, wooden swings and other outdoor projects.
Each project that your woodworking course includes should be like a mini course that allows you to see which direction you need to take in order to complete the project. Whether you want to try simple projects that are suitable for beginners or more complex projects such as office desks and entertainment centers, the range of projects will help in your self-development of woodwork skills and abilities.
Also, when choosing the course, try to choose a course that has many thousands of projects; with such a huge amount of different projects you can be sure that you will never run out of ideas no matter how experienced you are.
To sum it up, I would say that a good woodwork course should include a) in-depth woodworking instructions, illustrations and pictures and b) a wide range of woodwork projects that would be beneficial for beginners and experts alike.
If you are new to the woodworking industry and are a little apprehensive about getting started, first think about all the benefits you'll receive by following through in your decision. For starters, you could change a few things around the house; build a garden bench, a bedside table, a toy box for your child, or whatever else you can come up with. Also, why not use your woodworking skills to make a little extra money!
Perhaps the number one question that you're thinking right now is what characteristics you should be looking for. So do take your time when looking into the different options available to make sure you find the course that is right for you.
I believe that the most important thing in a good woodwork course is that it includes detailed and easy to understand instructions. When you start making a chair, table, or wooden stairs, you'll want to have a step-by-step guide on how to do it. It's always good to see some pictures, especially if you are a visual person like me, but let's not forget that those pictures need to be accompanied by clear instructions. Even though the saying is that a picture is worth a thousand words, it's often different when actually constructing something, therefore, in-depth step-by-step instructions are characteristics of a good woodworking course.
You'll also need to have each part labelled on the pictures so that you understand correctly how to put together the materials you're working with. Look for clearly marked diagrams and even colored pictures to help out with clarification in your woodwork projects. The detailed wording and explanation combined with the pictures and labels will not only help you when creating a piece of furniture or wood object, but they can also be used as a guide for other objects that you create down the line.
And of course you want to have a huge variety of woodwork projects to choose from. You'll probably want to try your hand at some of the common woodworking projects like chairs, tables, and birdhouses. However, you should also have the chance to try other wood objects, such as windmills, wooden shelving units, toys, wooden swings and other outdoor projects.
Each project that your woodworking course includes should be like a mini course that allows you to see which direction you need to take in order to complete the project. Whether you want to try simple projects that are suitable for beginners or more complex projects such as office desks and entertainment centers, the range of projects will help in your self-development of woodwork skills and abilities.
Also, when choosing the course, try to choose a course that has many thousands of projects; with such a huge amount of different projects you can be sure that you will never run out of ideas no matter how experienced you are.
To sum it up, I would say that a good woodwork course should include a) in-depth woodworking instructions, illustrations and pictures and b) a wide range of woodwork projects that would be beneficial for beginners and experts alike.
The Advantages Of Bespoke Radiator Cabinets For Fuel Efficiency
Custom made radiator cabinets not only add a significant amount of visual grace and elegance to a room, but serve a very practical benefit as well, one which could cut costs and help warm your rooms in a much more energy efficient manner. Bespoke radiator cabinets are always to be preferred to those which may be sold as standard, as they will be very much more robust, last very much longer, and perform in a much more efficient way. A wooden radiator cabinet is exposed to a great deal of heat, and in many cases a good deal of moisture as well. This places much more stress on the wood and the joints, which is why radiator covers made specially to order will perform far more efficiently and provide years of style.
In the past virtually every house would have a welcoming open fireplace around which the family would congregate. From the point of view of interior decoration we would refer to this as being a focal point of the room. However, with more effective central heating now available, in many cases the only focal point that can be identified is the widescreen TV! Being quite honest, standard radiators don't introduce much of beauty or sophistication to a house, and it's no wonder that they become disguised.
But bespoke radiator cover grills are not about hiding radiators or hiding them from view. Instead, it's about making them look more welcoming, adding grace and flair, blending in with the decor of the home and managing to compliment the theme or ambience which you, or your interior decorator, is trying to create. Steel radiators can't easily be varnished or styled without looking even worse, but a bespoke cabinet can be made in such a way that the decor or theme of your room is enhanced ideally.
A wooden radiator cabinet can be varnished, stained or painted to blend in perfectly with the rooms, instantly lifting the overall impression and sense of completion. Very little seems more depressing than spending all your time and energy redecorating a living space only to find an ugly dominating block of stark metal clinging to your wall, sneering at your efforts elsewhere! Radiator covers can be produced in a range of themes, with the grills available in several sizes and shapes. From small slits to trefoils, from clovers to delicate renaissance style patterns, the improvement is immediately apparent.
The top of a radiator can be a challenging place, simultaneously able to gather a scary collection of dust and debris, whilst being entirely inappropriate for placing photographs or tokens of interest. Made-to-order radiator cabinets include a ledge that resides along the top, lifted up a couple of inches above the top of the radiator itself. This ledge both protects the radiator from collecting dust, as well as offering an ideal surface on which to site a few decorations or photographs. Because the ledge is a little above the radiator, the heat should not affect the items placed on top. Tailor-made radiator cabinets manage to achieve this perfectly, and if it is your intention to place items on top of the radiator cabinet then it will be particularly important to make sure that it has been custom made for this design.
But it is not just about the visible improvements to a room that people prefer custom made radiator covers. A wooden radiator cover is able to make considerable improvements in the way the radiator works, raising its efficiency. This means that your rooms can be more efficiently, lowering heating expenses quite significantly. The reduction in fuel alone may well negate the price of the radiator cabinet itself in a few years.
How is this efficiency managed? Quite simply the radiator cabinet turns the radiated warmth of the radiator into convected heat, which is then redirected into the room. Usually a radiator's warmth rises up, reaching the ceiling, cooling and then dropping again. However, a wooden radiator cover draws colder air in at the bottom, and then directs the heat forwards through the radiator cover grills and into the room. Far less energy is lost, and the heat that is produced is delivered to where it is most required.
When deciding whether to buy a radiator cover or radiator cabinet it will be essential to make sure that you choose one which will be perfectly matched to the purpose and to your particular needs. No two properties are wholly the same, and there are always likely to be personal issues such as fabrics, furnishings, fixings and general use of the room that will impact on the suitability and success of your wooden radiator cabinet. Custom radiator covers take into account the specific dimensions of your room, the radiator, and the ways in which you want the radiator cabinet to be co-ordinated into the design of the room. Having the right custom-built radiator cabinet will make a massive difference in terms of home decoration as well as heating efficiency.
In the past virtually every house would have a welcoming open fireplace around which the family would congregate. From the point of view of interior decoration we would refer to this as being a focal point of the room. However, with more effective central heating now available, in many cases the only focal point that can be identified is the widescreen TV! Being quite honest, standard radiators don't introduce much of beauty or sophistication to a house, and it's no wonder that they become disguised.
But bespoke radiator cover grills are not about hiding radiators or hiding them from view. Instead, it's about making them look more welcoming, adding grace and flair, blending in with the decor of the home and managing to compliment the theme or ambience which you, or your interior decorator, is trying to create. Steel radiators can't easily be varnished or styled without looking even worse, but a bespoke cabinet can be made in such a way that the decor or theme of your room is enhanced ideally.
A wooden radiator cabinet can be varnished, stained or painted to blend in perfectly with the rooms, instantly lifting the overall impression and sense of completion. Very little seems more depressing than spending all your time and energy redecorating a living space only to find an ugly dominating block of stark metal clinging to your wall, sneering at your efforts elsewhere! Radiator covers can be produced in a range of themes, with the grills available in several sizes and shapes. From small slits to trefoils, from clovers to delicate renaissance style patterns, the improvement is immediately apparent.
The top of a radiator can be a challenging place, simultaneously able to gather a scary collection of dust and debris, whilst being entirely inappropriate for placing photographs or tokens of interest. Made-to-order radiator cabinets include a ledge that resides along the top, lifted up a couple of inches above the top of the radiator itself. This ledge both protects the radiator from collecting dust, as well as offering an ideal surface on which to site a few decorations or photographs. Because the ledge is a little above the radiator, the heat should not affect the items placed on top. Tailor-made radiator cabinets manage to achieve this perfectly, and if it is your intention to place items on top of the radiator cabinet then it will be particularly important to make sure that it has been custom made for this design.
But it is not just about the visible improvements to a room that people prefer custom made radiator covers. A wooden radiator cover is able to make considerable improvements in the way the radiator works, raising its efficiency. This means that your rooms can be more efficiently, lowering heating expenses quite significantly. The reduction in fuel alone may well negate the price of the radiator cabinet itself in a few years.
How is this efficiency managed? Quite simply the radiator cabinet turns the radiated warmth of the radiator into convected heat, which is then redirected into the room. Usually a radiator's warmth rises up, reaching the ceiling, cooling and then dropping again. However, a wooden radiator cover draws colder air in at the bottom, and then directs the heat forwards through the radiator cover grills and into the room. Far less energy is lost, and the heat that is produced is delivered to where it is most required.
When deciding whether to buy a radiator cover or radiator cabinet it will be essential to make sure that you choose one which will be perfectly matched to the purpose and to your particular needs. No two properties are wholly the same, and there are always likely to be personal issues such as fabrics, furnishings, fixings and general use of the room that will impact on the suitability and success of your wooden radiator cabinet. Custom radiator covers take into account the specific dimensions of your room, the radiator, and the ways in which you want the radiator cabinet to be co-ordinated into the design of the room. Having the right custom-built radiator cabinet will make a massive difference in terms of home decoration as well as heating efficiency.
Thursday, February 11, 2010
Pine Cabinets
Even if you're new to the idea, there's no denying the utter beauty of pine cabinetry. With a rustic look, versatile styling options, and pricing which generally runs a bit lower than many of the other choices available, it's no wonder why many home owners choose these cabinets when it comes to the design of their dream house.
A huge incentive for buyers comes with the knowledge that these cabinets come with many types of customization options. Pine can be yellow, white, or ponderosa. The yellow tends to be a bit more straw colored and lacks in density, while taking well to staining and paint. Though quite similar to yellow in these characteristics, the white version stays true to its name boasting a whiter tone. Ponderosa has more of a yellowish color while its heartwood can range anywhere from red to orange. However, the heartwood often requires more preparation if stain or paint are involved.
The fact that pine is of a lighter tone greatly increases the potential staining options. Darker woods are quite difficult to lighten. By beginning with a lighter base, it becomes much easier to obtain the desired shade you are looking for. A good wood conditioner should be applied prior to staining in order to avoid extreme lights and darks in the finish. Likewise, pre-sanding may be required to get rid of pesky scratches and dings due to how soft the wood naturally is.
When it's time to apply the stain it is suggested you experiment with the amount of time the stain is allowed to remain on the wood before being wiped off. In this way, you will be able to ensure the cabinets dry in a uniform shade. Once a time has been decided it's time to stain! Keep in mind, that although the conditioner will help the process, no outcome will be completely uniform. After the stain has dried completely, you are then able to add the finish of your choice.
Another option regarding the look of your pine cabinets is paint. Paint can always be applied to unfinished cabinets and can really make an impact on a room. It is more economical, timely, and efficient. Though, you should be sure of your decision should you choose to head this route as most paints tend to be rather difficult to remove from wood.
Still if a natural tone is more your style, consider adding a clear coat. Applying a clear finish is arguably the easiest most beautiful option available.
Regardless of your individual style, it's safe to say that at the end of it all, that the decision to go with pine for your cabinet needs will never make for a dull one.
Pine Cabinets by Albany experts are of the best quality. They answer all your needs with the natural beauty of quality woodwork and help you bring your ideas to a beautiful completion.
A huge incentive for buyers comes with the knowledge that these cabinets come with many types of customization options. Pine can be yellow, white, or ponderosa. The yellow tends to be a bit more straw colored and lacks in density, while taking well to staining and paint. Though quite similar to yellow in these characteristics, the white version stays true to its name boasting a whiter tone. Ponderosa has more of a yellowish color while its heartwood can range anywhere from red to orange. However, the heartwood often requires more preparation if stain or paint are involved.
The fact that pine is of a lighter tone greatly increases the potential staining options. Darker woods are quite difficult to lighten. By beginning with a lighter base, it becomes much easier to obtain the desired shade you are looking for. A good wood conditioner should be applied prior to staining in order to avoid extreme lights and darks in the finish. Likewise, pre-sanding may be required to get rid of pesky scratches and dings due to how soft the wood naturally is.
When it's time to apply the stain it is suggested you experiment with the amount of time the stain is allowed to remain on the wood before being wiped off. In this way, you will be able to ensure the cabinets dry in a uniform shade. Once a time has been decided it's time to stain! Keep in mind, that although the conditioner will help the process, no outcome will be completely uniform. After the stain has dried completely, you are then able to add the finish of your choice.
Another option regarding the look of your pine cabinets is paint. Paint can always be applied to unfinished cabinets and can really make an impact on a room. It is more economical, timely, and efficient. Though, you should be sure of your decision should you choose to head this route as most paints tend to be rather difficult to remove from wood.
Still if a natural tone is more your style, consider adding a clear coat. Applying a clear finish is arguably the easiest most beautiful option available.
Regardless of your individual style, it's safe to say that at the end of it all, that the decision to go with pine for your cabinet needs will never make for a dull one.
Pine Cabinets by Albany experts are of the best quality. They answer all your needs with the natural beauty of quality woodwork and help you bring your ideas to a beautiful completion.
Tuesday, February 9, 2010
Organizers For Kitchen Cabinets And Cupboards
Eliminate clutter in a kitchen cupboard with a versatile cabinet organization system, which often comes styled as a multi-tiered rack, shelve, drawer, or turntable.
A space-saving organizer system, with multiple levels, is an ideal piece of kitchenware to assist in tidying an often cluttered under sink cabinet or shelve. An split-level storage rack is perfect to make all supplies easier to locate, even those concealing at the rear of a cupboard.
Cabinet inserts come manufactured in a variety of resilient materials, with common choices including metal-coated wire, durable polypropylene, and all-natural wood. A flat surfaced organizer often features a non-skid surface to prevent items slipping or dropping off. A organizer in a wire-coated metal provides ease in maintaining, while those with a wooden finish often blends with most existing cabinets.
Cabinet organizers are often built in equal sized top and bottom shelves, although for more versatility in storage, its often an option to purchase a rack with a full length lower basket, and a half size upper basket to make it that much easier to conceal taller items.
Copco, ClosetMaid, and Household Essentials all produce a line of innovative 1, 2, or 3 tiered kitchen organization systems, with some shelves able to expand by up to 28-inches. This ensures sufficient space to store a vast selection of kitchen supplies, such as pet food, cleaning supplies or Tupperware items in a tidy manner.
In addition to the sliding or pullout shelves, a further choice is the 360 degree rotating turntables, which take most small-sized items, such as condiments, spices, or glassware. To stop items sliding as the unit is turned, a non-slip base and outer rim often feature.
Whether it is a pullout tray, deep baskets or a rotating turntable, these all offer effective organizational solutions in a quest to eliminate some of the clutter that seems to congregate in a kitchen cupboard and cabinet.
A space-saving organizer system, with multiple levels, is an ideal piece of kitchenware to assist in tidying an often cluttered under sink cabinet or shelve. An split-level storage rack is perfect to make all supplies easier to locate, even those concealing at the rear of a cupboard.
Cabinet inserts come manufactured in a variety of resilient materials, with common choices including metal-coated wire, durable polypropylene, and all-natural wood. A flat surfaced organizer often features a non-skid surface to prevent items slipping or dropping off. A organizer in a wire-coated metal provides ease in maintaining, while those with a wooden finish often blends with most existing cabinets.
Cabinet organizers are often built in equal sized top and bottom shelves, although for more versatility in storage, its often an option to purchase a rack with a full length lower basket, and a half size upper basket to make it that much easier to conceal taller items.
Copco, ClosetMaid, and Household Essentials all produce a line of innovative 1, 2, or 3 tiered kitchen organization systems, with some shelves able to expand by up to 28-inches. This ensures sufficient space to store a vast selection of kitchen supplies, such as pet food, cleaning supplies or Tupperware items in a tidy manner.
In addition to the sliding or pullout shelves, a further choice is the 360 degree rotating turntables, which take most small-sized items, such as condiments, spices, or glassware. To stop items sliding as the unit is turned, a non-slip base and outer rim often feature.
Whether it is a pullout tray, deep baskets or a rotating turntable, these all offer effective organizational solutions in a quest to eliminate some of the clutter that seems to congregate in a kitchen cupboard and cabinet.
Sunday, February 7, 2010
Cabinets and Their Price Details
A home's cabinetry makes an important statement. They can add much elegance and functionality to a home, not to mention improve the value of the property. Cabinets can be ready-made or they can be built customized to a homeowner's specifications.
The ready-made cabinets have a few positives going for them in terms of being inexpensive and readily available. There are many styles and materials available of the ready-made types and they can be installed fairly quickly. The downside is that old adage: "what you see is what you get". The homeowner will have to settle for and work around what is already built and available.
Custom cabinets can be built with any material that the consumer desires and to any design specifications. This is especially helpful in order to utilize the exact space that is available and to accomplish all storage and usage goals. Materials may include wood such as oak, pine, birch or maple which may be either stained or painted.
Metal, such as stainless steel, is being used in the designing of today's cupboards as well. Unique hardware, such as artistic knobs and pulls, can also be added to make an original design statement.
There are many components that make up the overall pricing detail of the custom cabinets. After a builder inspects the room where they will be building the cupboards, as well as to have a well thought out discussion with the homeowner regarding desires and specifics, the cabinet maker will be able to give a good estimate of cost. The project will entail costs related to the following items:
Design: This is the stage of the project where measurements will be taken so that the arrangement can be decided upon. Also, items such as number of cabinets, drawers, shelves, etc. will be determined.
Materials: The type of wood or metal that is chosen will affect the overall price, as some materials are more expensive than others.
Overhead and Labor: How much labor it will take to complete the project is taken into consideration, plus the time spent by the builder in purchasing and storing materials.
Building and finishing: Parts of the project will be built within the shop, while finishing touches will be done in the home
Delivery and installation: The final steps will be bringing the finished products to the home and installing them.
After taking all of these pricing details into consideration, the builder will be able to provide the homeowner will an accurate quote on the cost of the new custom cabinetry.
The ready-made cabinets have a few positives going for them in terms of being inexpensive and readily available. There are many styles and materials available of the ready-made types and they can be installed fairly quickly. The downside is that old adage: "what you see is what you get". The homeowner will have to settle for and work around what is already built and available.
Custom cabinets can be built with any material that the consumer desires and to any design specifications. This is especially helpful in order to utilize the exact space that is available and to accomplish all storage and usage goals. Materials may include wood such as oak, pine, birch or maple which may be either stained or painted.
Metal, such as stainless steel, is being used in the designing of today's cupboards as well. Unique hardware, such as artistic knobs and pulls, can also be added to make an original design statement.
There are many components that make up the overall pricing detail of the custom cabinets. After a builder inspects the room where they will be building the cupboards, as well as to have a well thought out discussion with the homeowner regarding desires and specifics, the cabinet maker will be able to give a good estimate of cost. The project will entail costs related to the following items:
Design: This is the stage of the project where measurements will be taken so that the arrangement can be decided upon. Also, items such as number of cabinets, drawers, shelves, etc. will be determined.
Materials: The type of wood or metal that is chosen will affect the overall price, as some materials are more expensive than others.
Overhead and Labor: How much labor it will take to complete the project is taken into consideration, plus the time spent by the builder in purchasing and storing materials.
Building and finishing: Parts of the project will be built within the shop, while finishing touches will be done in the home
Delivery and installation: The final steps will be bringing the finished products to the home and installing them.
After taking all of these pricing details into consideration, the builder will be able to provide the homeowner will an accurate quote on the cost of the new custom cabinetry.
Saturday, February 6, 2010
Cabinets & Side Tables
Do you believe that they just point of side a table is to polish off the appearance of your dining room? At the present, sure, they are quite overwhelming for doing only that, but the matter is, they can really be wonderful accompaniments to other points during your house additionally.
The file cabinets' appearance seems to be modified a wonderful deal as the very first cabinet was made in the 1800's. Timber made file cabinets is a great feel in the company office of a senior manager or in a house workplace to brogue the bookshelves and desk decoration. Timber made wood file cabinets have been something for a very long time and exist in several special styles and sizes. In the earth, where moving without paper is the matter to fight for it, is still not sensible for all docs. We, every time, expect to divest you of the mess and regular encumber of paper but understand that few things still have to be kept back.
Record maintaining comes in every forms and dimension and there is a folder cabinet, which will provide accommodation almost every work. Many administrative persons and people with house offices recommend the appearance of timber cabinets. They exist in vertical as well as horizontal file cabinets. Many file cabinets exist with a locked key to avoid illegal access to the important files being kept. This file cabinet exists in several sizes and grip paper, which is 80/2 x 10 or the bigger legal sized paper. Physicians and other specialized offices also utilize shelf filing cabinets to put up their big files.
There are numerous other stuffs and techniques side tables can be ended also. So many, actually, that they're easily is not sufficient time to register them all. However, what we can find into is the various points, which they would employ all through your house. You could also build one towards a long, large hallway as a wonderful technique to disintegrate after the area and even show family snaps.
Concerned about side tables? If yes, an unbelievable method to explore all the options is by going at the Internet for few comparison buying. In no instance at all will you be capable of observe all the options only by surfing the various online shops. In addition, when you choose anything, it will usually be at a quite practical selection, and it will be delivered right at your house. Actually, shopping has never been an easy job.
The new appearance of timber office furniture is the camel color of timber, which is really fashionable and elegant in a home based office or business. Furniture shops have wonderful designs and plans for each pocketbook. As soon as it approaches down to it, side tables are a furnishing, which would actually be a big choice for appending to other rooms next to the living room. As a result, have benefited of this grand furnishing and pay for yours today!
The file cabinets' appearance seems to be modified a wonderful deal as the very first cabinet was made in the 1800's. Timber made file cabinets is a great feel in the company office of a senior manager or in a house workplace to brogue the bookshelves and desk decoration. Timber made wood file cabinets have been something for a very long time and exist in several special styles and sizes. In the earth, where moving without paper is the matter to fight for it, is still not sensible for all docs. We, every time, expect to divest you of the mess and regular encumber of paper but understand that few things still have to be kept back.
Record maintaining comes in every forms and dimension and there is a folder cabinet, which will provide accommodation almost every work. Many administrative persons and people with house offices recommend the appearance of timber cabinets. They exist in vertical as well as horizontal file cabinets. Many file cabinets exist with a locked key to avoid illegal access to the important files being kept. This file cabinet exists in several sizes and grip paper, which is 80/2 x 10 or the bigger legal sized paper. Physicians and other specialized offices also utilize shelf filing cabinets to put up their big files.
There are numerous other stuffs and techniques side tables can be ended also. So many, actually, that they're easily is not sufficient time to register them all. However, what we can find into is the various points, which they would employ all through your house. You could also build one towards a long, large hallway as a wonderful technique to disintegrate after the area and even show family snaps.
Concerned about side tables? If yes, an unbelievable method to explore all the options is by going at the Internet for few comparison buying. In no instance at all will you be capable of observe all the options only by surfing the various online shops. In addition, when you choose anything, it will usually be at a quite practical selection, and it will be delivered right at your house. Actually, shopping has never been an easy job.
The new appearance of timber office furniture is the camel color of timber, which is really fashionable and elegant in a home based office or business. Furniture shops have wonderful designs and plans for each pocketbook. As soon as it approaches down to it, side tables are a furnishing, which would actually be a big choice for appending to other rooms next to the living room. As a result, have benefited of this grand furnishing and pay for yours today!
Friday, February 5, 2010
Three Things to Check When Buying Wooden Modern Furniture
Modern furniture pieces are versatile furnishings that are available in a variety of materials. While you’re probably more aware of metal or glass, there are still several pieces in this type of collection that are manufactured from wood. But unlike the other materials, wooden pieces have their own set of considerations in order to properly judge quality. So when before buying wood furniture for your house, here are the three most important things to look at.
Source
The foremost marker of the quality of wooden modern furniture is the source. The type of wood used, in addition, also affects the use, appearance and the price of the piece. Cherry wood, for instance, are more expensive than pine. Generally, though, wooden furniture is either made from softwood or hardwood.
Birch, oak, maple, cherry, walnut and mahogany are all hardwoods; and you can expect high-quality wooden modern furniture pieces to come out of them. Furthermore, pieces made from hardwood are air dried and removed of all moisture by kiln drying.
Softwoods, on the other hand, are prone to damage like scratches and dents, though you still can find several high-quality furniture pieces made from such wood. Examples of these are pine, redwood, fir and cedar.
Construction
It’s important to determine the construction of the furniture piece you're about to purchase. The construction of the piece will likely identify the overall appearance, function and even life. High-quality constructed pieces are sturdy and tend to last longer than its counterparts.
There are several types of joints used for creating furniture, and two of the most popular are dovetails, and mortise and tenon. You may also stumble upon pieces that are joined by screws or dowels. If you’re looking for extra strength, opt for pieces with additional corner blocks.
Finish
The final consideration you should look out for is finish. What you must know is that any quality piece must go through three crucial processes: sanding, staining and finishing. Sanding will provide the furniture with a smooth surface and even imperfections to the wood, which adds to the overall appeal.
Staining, on the other hand, is used to improve the look of the wood and add color to it. You can judge a quality piece by the way it was stained; pieces that undergone good staining don’t contain any dark spots
Finishing is the last stage of the process, which will provide the wooden modern furniture with either a high gloss or matte finish. When judging the quality of the finish, always look for a satin, smooth finish. There shouldn’t be any bubble or rough spots. Furthermore, all the parts, including the underside, must be finished.
Source
The foremost marker of the quality of wooden modern furniture is the source. The type of wood used, in addition, also affects the use, appearance and the price of the piece. Cherry wood, for instance, are more expensive than pine. Generally, though, wooden furniture is either made from softwood or hardwood.
Birch, oak, maple, cherry, walnut and mahogany are all hardwoods; and you can expect high-quality wooden modern furniture pieces to come out of them. Furthermore, pieces made from hardwood are air dried and removed of all moisture by kiln drying.
Softwoods, on the other hand, are prone to damage like scratches and dents, though you still can find several high-quality furniture pieces made from such wood. Examples of these are pine, redwood, fir and cedar.
Construction
It’s important to determine the construction of the furniture piece you're about to purchase. The construction of the piece will likely identify the overall appearance, function and even life. High-quality constructed pieces are sturdy and tend to last longer than its counterparts.
There are several types of joints used for creating furniture, and two of the most popular are dovetails, and mortise and tenon. You may also stumble upon pieces that are joined by screws or dowels. If you’re looking for extra strength, opt for pieces with additional corner blocks.
Finish
The final consideration you should look out for is finish. What you must know is that any quality piece must go through three crucial processes: sanding, staining and finishing. Sanding will provide the furniture with a smooth surface and even imperfections to the wood, which adds to the overall appeal.
Staining, on the other hand, is used to improve the look of the wood and add color to it. You can judge a quality piece by the way it was stained; pieces that undergone good staining don’t contain any dark spots
Finishing is the last stage of the process, which will provide the wooden modern furniture with either a high gloss or matte finish. When judging the quality of the finish, always look for a satin, smooth finish. There shouldn’t be any bubble or rough spots. Furthermore, all the parts, including the underside, must be finished.
Wednesday, February 3, 2010
Amish Built Solid Wooden Gun Cabinet
When you think about something handmade in the United States you first would think of Amish made. The reason is the pride and tradition that the Amish have earned over the decades. The son of a father’s father was a woodworker’s craftsman and was shown the way to marry the wood pieces together and make a beautiful wooden gun cabinet that any home owner would be proud to display in their living room or den. This old fashioned traditional way of making furniture will let you the customer describe your wants and needs to the craftsman. Whether it to be made of a specific type of wood, cherry, oak, walnut or mahogany of a certain dimension that the gun cabinet has to be to fit into a particle place or setting. Being hand crafted and not pounced off with a jig on a machine allows you to have that custom one of a kind piece to fulfill you requirements.
If you are a collector or have a passion for firearms, rifles, shotguns, muzzleloaders and pistols you are going to want a place or area to them. Way collect them if you cannot share them with the people you know would appreciate them. I cannot think of a better place than in the security of my home to show them off.
Having a handmade wooden gun cabinet to pass on to your heirs would be a precious family heirloom by its own right. If that beautiful crafted cabinet was to have your prized collection of rifles and shotguns to showcase inside your heirlooms cabinet and guns would be kept safe from damage and pass on to generation to generations to come.
If you cannot find an Amish craftsman locally there are some fine furniture makers all across America that still take a lot of pride and integrity in their craft. Most wooden gun cabinets are fitted with locks on the cabinet doors to insure that only authorized persons are to have access to your firearms inside. The gun storage supplies should be lockable to keep the ammunition and guns separate.
You firearms are not the only things that you can display inside your cabinet. I have seen arrowhead collections, Hummel’s, hunting knives and collectible knives. The display cabinet is very versatile. With the cost that you have already invested into your collection investing in a way to display them and keep them secure from damage helps protect that investment for you and your grandsons someday.
If you are a collector or have a passion for firearms, rifles, shotguns, muzzleloaders and pistols you are going to want a place or area to them. Way collect them if you cannot share them with the people you know would appreciate them. I cannot think of a better place than in the security of my home to show them off.
Having a handmade wooden gun cabinet to pass on to your heirs would be a precious family heirloom by its own right. If that beautiful crafted cabinet was to have your prized collection of rifles and shotguns to showcase inside your heirlooms cabinet and guns would be kept safe from damage and pass on to generation to generations to come.
If you cannot find an Amish craftsman locally there are some fine furniture makers all across America that still take a lot of pride and integrity in their craft. Most wooden gun cabinets are fitted with locks on the cabinet doors to insure that only authorized persons are to have access to your firearms inside. The gun storage supplies should be lockable to keep the ammunition and guns separate.
You firearms are not the only things that you can display inside your cabinet. I have seen arrowhead collections, Hummel’s, hunting knives and collectible knives. The display cabinet is very versatile. With the cost that you have already invested into your collection investing in a way to display them and keep them secure from damage helps protect that investment for you and your grandsons someday.
Tuesday, February 2, 2010
5 Tips When Shopping for Quality Wood Furniture
Before shopping for wood furniture for your home or business there are a few things to look for before investing; the difference between inferior and quality wood furniture will determine how well the piece(s) withstands time and wear.
Hardwood furniture verses softwood might be your first choice; the price is often a bit more but so is the quality. Softwoods, such as white or yellow pine, cypress, and fir, are more prone to scratches and marring, whereas hardwoods like mango wood, oak and walnut or cherry are more resistant.
Susan James, proprietor of Turi Imports, importer of mango wood furniture in Costa Rica, offers five tips to help you shop smart and get more value for your money. Not all sales people may be able to answer your questions so a sharp eye as to what to look for will assist in making a more savvy purchase of hard wood furniture.
1) Eco-friendly? – More and more people are demanding a “green” approach to the items they buy and this includes furniture. In some countries precious natural resources continue to be exploited, especially forests of hard woods. Determine the origin of the item(s). Is the type of wood listed on an endangered list? Ideally, you want to purchase hardwood furniture made from sustainable plantations, such as mango wood or teak.
2) Frame Construction – The absolute key to purchasing quality furniture is to determine the construction of the frame; you really want only those made of hardwoods. Hardwood furniture will endure the test of time and prevent the likelihood of warping or shrinking. This will lessen an irritating “rocking” of your furniture with exposure to varying temperatures (think: heaters and air conditioners).
3) Joint Construction – Craftsman and manufacturers of quality wood furniture employ various types of joint construction; dove tailing, an art of fitting pieces of wood together to join corners is ideal, however, quality screws that are countersunk are acceptable as long as the screw hasn’t cracked the wood and is drilled straight into the joints.
4) Drawers and Doors – Open, close, open close. If a drawer or door “sticks” or wobbles you can pretty much bet that over time this could become an issue. Look for drawers that are set on guides, hardwood or metal; there should be a smooth rolling both to open and close. As is true for doors which should be milled and hung straight with a quality “catch” to open and close easily and securely.
5) A Fine Finish – Depending on the purpose of the furniture you are considering, the finish is an important detail not to be overlooked. A cabinet or display piece will not be exposed to the same elements as a dining room or coffee table. A piece that has a polyurethane finish can be easily wiped clean and not incur moisture rings. A French Polish finish is ideal as well, for protecting and enhancing a beautifully-grained hard wood.
Keep these five tips in mind as you are shopping for quality wood furniture; doing so will provide you more value for your dollars and give you years of enjoyment with your new furnishings.
Hardwood furniture verses softwood might be your first choice; the price is often a bit more but so is the quality. Softwoods, such as white or yellow pine, cypress, and fir, are more prone to scratches and marring, whereas hardwoods like mango wood, oak and walnut or cherry are more resistant.
Susan James, proprietor of Turi Imports, importer of mango wood furniture in Costa Rica, offers five tips to help you shop smart and get more value for your money. Not all sales people may be able to answer your questions so a sharp eye as to what to look for will assist in making a more savvy purchase of hard wood furniture.
1) Eco-friendly? – More and more people are demanding a “green” approach to the items they buy and this includes furniture. In some countries precious natural resources continue to be exploited, especially forests of hard woods. Determine the origin of the item(s). Is the type of wood listed on an endangered list? Ideally, you want to purchase hardwood furniture made from sustainable plantations, such as mango wood or teak.
2) Frame Construction – The absolute key to purchasing quality furniture is to determine the construction of the frame; you really want only those made of hardwoods. Hardwood furniture will endure the test of time and prevent the likelihood of warping or shrinking. This will lessen an irritating “rocking” of your furniture with exposure to varying temperatures (think: heaters and air conditioners).
3) Joint Construction – Craftsman and manufacturers of quality wood furniture employ various types of joint construction; dove tailing, an art of fitting pieces of wood together to join corners is ideal, however, quality screws that are countersunk are acceptable as long as the screw hasn’t cracked the wood and is drilled straight into the joints.
4) Drawers and Doors – Open, close, open close. If a drawer or door “sticks” or wobbles you can pretty much bet that over time this could become an issue. Look for drawers that are set on guides, hardwood or metal; there should be a smooth rolling both to open and close. As is true for doors which should be milled and hung straight with a quality “catch” to open and close easily and securely.
5) A Fine Finish – Depending on the purpose of the furniture you are considering, the finish is an important detail not to be overlooked. A cabinet or display piece will not be exposed to the same elements as a dining room or coffee table. A piece that has a polyurethane finish can be easily wiped clean and not incur moisture rings. A French Polish finish is ideal as well, for protecting and enhancing a beautifully-grained hard wood.
Keep these five tips in mind as you are shopping for quality wood furniture; doing so will provide you more value for your dollars and give you years of enjoyment with your new furnishings.
Monday, February 1, 2010
Install Inset Kitchen Cabinet Doors
Inset kitchen cabinet doors are a rare variation on doored and framed cabinets. The doors on this type of cabinet are somewhat different to the normal framed kitchen cabinet doors. You must fit inset doors carefully in order for them to look correctly. You usually see inset cabinet doors on framed cabinets, although they can also appear on nonframe or overlaid cabinets, where the doors fit closely into the edges to give the appearance of an inset door. You can install inset kitchen cabinet doors by following these instructions.
Materials Needed:
■Kitchen cabinet
■Doors
■Measuring tape
■Hinges
■Screws
■Screwdriver or drill
■Door stops
Step 1 - Measure and Cut the Doors
In order to get the right fit for your inset kitchen cabinet doors, you will first need to carefully measure the inside of the kitchen cabinet. You are trying to fit the door inside the frame, and this task needs a much more accurate alignment of the doors and the frames than you would normally need. The door must fit precisely.
Cut your kitchen cabinet doors to fit the measurements of the inside of the frame. Sand the edges down to produce a smooth finish. You should leave enough of a gap to accommodate any swelling of the door during winter.
Step 2 - Apply the Hinges
Install base plates for the hinges. Use the holes designed for shelf pins.
Then measure the length from the bottom of the cabinet's inside to the middle of the lower base plate. Subtract 3 mm from the total measurement.
Use the new amount to drill the hole which will be the center of the hinge on the door. Attach the hinge arms and adjust to fit the door into the frame. Repeat with the top hinge on the door.
Step 3 - Make Adjustments
You should now be able to lift the door onto the hinge plates set in the cabinet frame. Join the two parts of the hinge together. Make sure that the inset is not pressing upon any part of the door frame, as this may prevent the door from opening if the wood swells. Brush away any sawdust or debris caused by your attaching the hinges.
Step 4 - Fit a Door Stop
Door stops are not necessary in the more traditional frame doors, but with an inset, you will need some way of making sure that the door does not bend too far into the cabinet. A door stop fulfills this purpose.
You can add specially designed door stops to the space between the hinges on the side of the frame, or you can add them just inside the door at the bottom of the cabinets. If you choose the latter, you will need to measure carefully to be sure you don't end up with part of your door sticking out.
You should also check the range of the hinges, as a door stop too far into the cupboard can put a lot of pressure on the hinges and actually damage them.
As an alternative, you can screw a small picture-hanger into the top of the cabinet and use this to keep the door closed.
Article from doityourself.com
Materials Needed:
■Kitchen cabinet
■Doors
■Measuring tape
■Hinges
■Screws
■Screwdriver or drill
■Door stops
Step 1 - Measure and Cut the Doors
In order to get the right fit for your inset kitchen cabinet doors, you will first need to carefully measure the inside of the kitchen cabinet. You are trying to fit the door inside the frame, and this task needs a much more accurate alignment of the doors and the frames than you would normally need. The door must fit precisely.
Cut your kitchen cabinet doors to fit the measurements of the inside of the frame. Sand the edges down to produce a smooth finish. You should leave enough of a gap to accommodate any swelling of the door during winter.
Step 2 - Apply the Hinges
Install base plates for the hinges. Use the holes designed for shelf pins.
Then measure the length from the bottom of the cabinet's inside to the middle of the lower base plate. Subtract 3 mm from the total measurement.
Use the new amount to drill the hole which will be the center of the hinge on the door. Attach the hinge arms and adjust to fit the door into the frame. Repeat with the top hinge on the door.
Step 3 - Make Adjustments
You should now be able to lift the door onto the hinge plates set in the cabinet frame. Join the two parts of the hinge together. Make sure that the inset is not pressing upon any part of the door frame, as this may prevent the door from opening if the wood swells. Brush away any sawdust or debris caused by your attaching the hinges.
Step 4 - Fit a Door Stop
Door stops are not necessary in the more traditional frame doors, but with an inset, you will need some way of making sure that the door does not bend too far into the cabinet. A door stop fulfills this purpose.
You can add specially designed door stops to the space between the hinges on the side of the frame, or you can add them just inside the door at the bottom of the cabinets. If you choose the latter, you will need to measure carefully to be sure you don't end up with part of your door sticking out.
You should also check the range of the hinges, as a door stop too far into the cupboard can put a lot of pressure on the hinges and actually damage them.
As an alternative, you can screw a small picture-hanger into the top of the cabinet and use this to keep the door closed.
Article from doityourself.com
Subscribe to:
Posts (Atom)